This commit was generated by cvs2svn to compensate for changes in r2,HEADmaster

which included commits to RCS files with non-trunk default branches.

1 files changed, 111 insertions, 0 deletions

diff --git a/Changelog b/Changelog
new file mode 100644
index 0000000..fb7e86f
--- /dev/null
+++ b/Changelog
@@ -0,0 +1,111 @@
+0.16    27.12.2003
+    - added support for Catweasel MK3 card
+    - added support for PCI HardSID cards
+    - more modular for easier support of new card types
+    - updated kernel compatibility and cleanups
+    - updated Makefile for 2.6 kernels
+
+0.15a   26.1.2002
+    - fixed read ioctl that Sidplay2 is going to use
+
+0.15    25.1.2002
+    - added /proc support for 2.2 kernels. The file is not
+      /proc/driver/hardsid but /proc/hardsid as there is no /proc/driver
+      directory in 2.2 :( For consistency moved it in 2.4 kernels too.
+    - fixed a mute problem from the sidplay2 patch
+    - added ability to disable filters via ioctl
+    - reduced speaker pops and clicks by modifing reset ioctl
+    - fixed oops with multiple chips
+    - added flush, read and delay ioctls
+    - all configurable things are now normal module options
+    - writes cleaned up, only one function does it anymore
+    - ioctl definitions put to separate header file
+    - faked reads to write only registers speed up some tunes
+    - added Quattro hack to play a tune through all SIDs on a Quattro card
+    - compatibility with the first 2.5 kernels
+
+0.14    23.2.2001
+    - CVS repository moved to Sourceforge
+    - updated sidplay2 patch, unpacked
+    - added devfs support
+    - added card detection override hack
+    - added mute support
+
+0.13    27.1.2001
+    - SID type autodetection tested to work with 8580
+    - DUH! 0.12 oopses if you try to open an unexisting device...
+    - slightly updated sidplay2 patch
+
+0.12    27.1.2001
+    - fixed a problem with 2.2 kernels. It seems doing a sema_init on
+      semaphore doesn't initialize it properly, but doing a init_MUTEX before
+      it does... grr...
+    - added newer sidplay2 patch, check README for build instructions
+
+0.11    25.1.2001
+    - tested to work on Alpha! Required compiler options are documented in
+      Makefile
+    - multiple SID support! Now you can use 1-16 SIDs at the same time
+      using /dev/sidXX where each device maps to one SID. This has been
+      tested to work with hacked Sidplay2 using stereo .MUS files and two
+      normal HardSID cards (on Alpha :)
+    - device numbers changed for multisid support (60 by default, change
+      from source), minors are from 0 (/dev/sid0) to 15 (/dev/sid15). I 
+      applied for an assigned major for this device (60 is marked as for 
+      local/experimental use), let's see how it goes.
+    - fixed a bug with reads and Quattro cards
+    - simplified reset ioctl
+
+0.10    24.1.2001
+    - moved to Sourceforge! http://hardsid.sourceforge.net, or
+      http://www.sourceforge.net/projects/hardsid, as the first URL
+      doesn't seem to work yet.
+    - some cleanup and initial support for Quattro cards (card type and all
+      chips should be detected, only first one is used for now though).
+    - added ioctl to query card type
+
+0.09    15.1.2001
+    - Added support for dummy writes (register 0x1f) for delays longer than
+      0xffff cycles, fixed David Whittaker's Lazy Jones.
+      
+0.08    14.1.2001
+    - Added CVS tags
+    - Fixed reset, the previous version actually didn't work...
+
+0.07    14.1.2001
+    - #include cleanup
+    - some ioctls (reset, fifo status, SID type)
+
+0.06    5.1.2001
+    - Added autodetection of the HardSID cards including checking the chip
+      type (6581/8580). Both are of course untested except with my 6581 at
+      0x300 :) Success/failure reports very welcome, especially from 8580
+      users. The code detects all four possible cards, but uses only the
+      first one for now.
+    - SID reading now actually works, you have to OR 0x20 to the register
+      when writing it to the chip before reading.
+
+0.05    3.1.2001
+    - Ouch, reads froze the machine, now fixed. They still are quite
+      problematic as the whole buffer has to be flushed before reading.
+
+0.04    31.12.2000
+    - All kinds of statistics
+    - Some timing changes
+
+0.03    18.12.2000
+    - SMP support now tested to work, some small locking changes
+    
+0.02    16.12.2000
+    - Added some SMP locks	
+    - Tested to work on 2.2.18
+    - Always delay a bit (in this case two cycles) to give SID some time
+      to process writes
+    - Reset all registers on open, turn master volume on for some tunes
+    - Wait until all writes are done before reading
+
+0.01	15.12.2000
+    - Totally untested support for 2.2 kernels
+
+0.0     15.12.2000
+    - Initial release